Home
 
DEMON CARBURETION Delivers Unparalleled Performance and Drivability
 
Tuning Tips and Trouble Shooting
Previous Page Next Page
Chapter
 
Symptom Remedy
Fuel comes out of vent tube or runs out A) Lower float level
B) Decrease fuel pressure
C) Remove, clean/replace needle-&-seat
D) Inspect float to ensure it's moving freely
 
Backfires or Pops through carburetor A) Open idle-mixture screws
B) Increase squirter size
C) Increase jet size
D) Raise float level
 
Backfires or Pops through exhaust A) Lower float level
B) Decrease fuel pressure
C) Decrease jet size
D) Readjust butterfly position, primary & secondary
 
Engine won't start A) Prime carburetor with fuel
B) Pump squirters to get fuel flowing
C) Check ignition timing
 
Fuel leaks from throttle shafts A) Lower float level
B) Decrease fuel pressure
C) Readjust butterfly position, primary & secondary
 
Is rich at idle A) Increase initial timing
B) Go in on mixture screws
C) Readjust butterfly positions
D) Lower float level
E) Decrease fuel pressure
 
Stumbles under light acceleration A) Open mixture screws
B) Readjust butterfly positions
C) Raise float level
 
Stumbles under hard acceleration A) Readjust butterfly position
B) Increase squirter size
 
Won't return to idle A) Increase initial timing
B) Readjust butterflies
 
Surges at part throttle A) Open idle-mixture screws
B) Open primary butterflies & close secondary
C) Raise float level
D) Increase jet size
 
Emits black smoke under hard acceleration A) Lower float level
B) Decrease fuel pressure
C) Decrease jet size

 

 

2-Barrel Road Demons
2-Barrel Race and Race/RS Demons
390/750 Check Legal
Specialty Shop
Tuning Tips and Trouble Shooting

 
 

 

Get the New Barry Grant Catalog

Featuring over 1,800 premium products highlighting the excellence of Barry Grant Inc.

Barry Grant’s 2006 catalog is now available.

Click Here to order your copy today!

 
Tuning Tips and Trouble Shooting
Previous Page Next Page
Top

Printing Setup for Barry Grant